Battery Failure - If the battery is not holding a charge then you may need a replacement.

 
 

Try charging the battery for a full 24 hours and then try to start the trap again

 
 

If you get the same results then you may need a replacement battery. Please check out our on-line store or call technical support.

 
 

Unable to charge the battery.

 
 

Take the power cord to a local electronics shop or Radio Shack and ask them if they would check it. The power cord should have 8 volts DC, 600 mA.

 
 

If the power cord is not producing 8 volts DC, 600 mA then you will need a replacement. If the power cord is OK then there maybe a problem with the power head. Please check out our on-line store or call technical support.

 
 

Battery not properly connected.

 
 

Disconnect the battery and reattach.

 
 

If the trap still does not work try charging the trap for a full 24 hours. Also refer to the previous two steps as well.

 
 

Power Head Failure - Pro/Pro Plus upper assembly

 
 

If you have battery and it has a charge and the trap will still not start then there may be a problem with the power head

 
 

Contact technical support to get a replacement power head.

 
Mosquito Magnet® Pro/Pro Plus
Trap will not power up

If the Mosquito Magnet® does not power up, then there may be one of several problems. Here is a list of possible causes of this problem. Click on the tab for the How To Check & Resolution.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


If you still need additional assistance
Please contact customer service
<< Back to previous page


All Text and Graphics Copyright ©2003 American Biophysics Corp.
 All Rights Reserved. Not to be reproduced without permission.