Mosquito Magnet® Liberty
The Net is not installed properly

Red On, Yellow off, Green Flashing

This error indicates that the Net is not installed properly or needs to be replaced. NOTE: This error applies to models made 2003 and beyond only Newer Mosquito Magnet® Liberty models do not have this feature.

How to fix if net is not installed properly.

  1. Shut off trap and unplug from the wall outlet.
  2. Open clear door by turning the handle a quarter turn clockwise.
  3. Remove the Net.
  4. Note the image to the right. There is a small switch that looks like a roller on the outside of the opening where you slide the Net into place. Click to zoom in for a close up.
  5. When you slide the Net down on to the holder the Tab on the Net frame must hit the Net switch.
  6. If you have tried this several times and still get the same fault, you may need to replace the Net.

To get replacement Nets

If you still need additional assistance
Please contact customer service
<< Back to previous page

All Text and Graphics Copyright ©2003 American Biophysics Corp.
 All Rights Reserved. Not to be reproduced without permission.